Effect of Additives on Product Properties. At lower temperatures can significantly promote the Cr2O3 material sintering, refractory castable access to physical and chemical indicators to achieve or exceed the advanced products of similar products. In order to be able to fully crush Cr2O3 at lower temperatures, two techniques have been taken: (1) to improve Cr2O3 fineness as much as possible without affecting the yield of the product. (2) the introduction Refractory company of the ion radius and Cr3 + radius of the similar additives, so that in the appropriate (2) the introduction of the ion radius and Cr3 + radius of the additive, so that the greater the size of the grain, the greater the degree of distortion and radius of curvature of the grain, the higher the activity of the insulation products material, Oxygen partial pressure range sintering to form continuous solid solution and finite solid solution, destroying the ordered arrangement of Cr atoms, leading to the introduction of atomic potential around the change, resulting in Cr2O3 crystal periodic potential field distortion, accelerate the self-diffusion rate of chromium ions, Promote the sintering of Cr2O3 material.
Henan Xinmi Changxing Refractory Material Co., Ltd. Located in Henan Province,China,has been making refractory products from 1978. ChangXing's product covers refractory materials,refractory brick, refractory castable,refractory nozzle, ceramic fiber, slide gate, etc; Changxing products have been exported to more than 20 countries, such as Thailand, Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq...
2017年4月5日星期三
Research on Burning Process of Refractory Brick
The components of the additive are compatible with the glass components and can react with the Cr2O3 at the same time to refractory brick promote the thermal defects in the interior and the surface of the Cr2O3 crystal and the Schottky thermal deformation in the heated state. , To accelerate the process of mass diffusion and surface diffusion of the material firebrick refractory during firing. Some of the components in the additive react with Cr2O3 to form a solid solution, which is crystallized from the melt and deposited at the grain boundaries of the Cr2O3 grains to form a ring crystal band to control the growth of the Cr2O3 grains and to strengthen the intergranular phase Combined to improve the strength of the product. Based on the above considerations, a number of additives were selected for the experimental study, where two representative additives were screened for comparison, one for additive A and the other for additive B.
Effect of Additives on Product Properties. At lower temperatures can significantly promote the Cr2O3 material sintering, refractory castable access to physical and chemical indicators to achieve or exceed the advanced products of similar products. In order to be able to fully crush Cr2O3 at lower temperatures, two techniques have been taken: (1) to improve Cr2O3 fineness as much as possible without affecting the yield of the product. (2) the introduction Refractory company of the ion radius and Cr3 + radius of the similar additives, so that in the appropriate (2) the introduction of the ion radius and Cr3 + radius of the additive, so that the greater the size of the grain, the greater the degree of distortion and radius of curvature of the grain, the higher the activity of the insulation products material, Oxygen partial pressure range sintering to form continuous solid solution and finite solid solution, destroying the ordered arrangement of Cr atoms, leading to the introduction of atomic potential around the change, resulting in Cr2O3 crystal periodic potential field distortion, accelerate the self-diffusion rate of chromium ions, Promote the sintering of Cr2O3 material.
Effect of Additives on Product Properties. At lower temperatures can significantly promote the Cr2O3 material sintering, refractory castable access to physical and chemical indicators to achieve or exceed the advanced products of similar products. In order to be able to fully crush Cr2O3 at lower temperatures, two techniques have been taken: (1) to improve Cr2O3 fineness as much as possible without affecting the yield of the product. (2) the introduction Refractory company of the ion radius and Cr3 + radius of the similar additives, so that in the appropriate (2) the introduction of the ion radius and Cr3 + radius of the additive, so that the greater the size of the grain, the greater the degree of distortion and radius of curvature of the grain, the higher the activity of the insulation products material, Oxygen partial pressure range sintering to form continuous solid solution and finite solid solution, destroying the ordered arrangement of Cr atoms, leading to the introduction of atomic potential around the change, resulting in Cr2O3 crystal periodic potential field distortion, accelerate the self-diffusion rate of chromium ions, Promote the sintering of Cr2O3 material.
2017年3月13日星期一
Test Measures for Damage to Refractory Products
Through the coloring, contrast and set the value, can find out a lot of performance, in particular, can easily determine the degree of wear, glass-refractory interface displacement or infiltration boundary position; with a quantitative value of visual inspection. The scanning method is intended to improve the accuracy of the evaluation of corroded specimens, rather than for microstructure studies. In fact, the magnification obtained with a flatbed A4 scanner is limited, which is related to the optical resolution of the device (typically 600 dpi to 120odpi). In accordance with the traditional test method, at the test temperature of the kiln, the finely ground aggressive material acts on the refractory materials for furnace. Use a cement to bond the hollow cylinder to a square bottom parallelepiped. Each of the citrus fills 15 grams of container glass. The less the material. In order to obtain accurate results, the residual glass surface was scanned with the new scanning technique described above without using the old time-consuming planar measurement technique. In addition, surface osmosis was measured.
2) image processing; 3) three-dimensional calibration, the pixel conversion into a dedicated length unit; 4) by contrast and threshold determination and other image processing on the selected area for surface measurement, and then on the Infiltration depth for statistical description. This can be done by making a series of measurements along the impregnation area. Using the standard deviation, the infiltration uniformity can be reliably evaluated, and the average value of the impregnation can be determined.
PRI products in all samples, the remaining glass spray paint surface area. In addition, the infiltration degree is limited to a small part of the wall thickness of citrus. The refractory material in the interface area in contact with the glass is free of erosion, even at the glass level, and the result may be low against the degree of impregnation. The sample was placed in an electric furnace, heated to 1400 ° C in 14 hours, then warmed at 1400 ° C for 24 hours, and then cooled to room temperature in an electric furnace. Choose to simulate the actual operation of the soaking temperature. When measuring, cut the sample in half so that the glass-Refractory company interface is cross-section tested. The cross-sectional area of ??the remaining glass was measured by a reliable quantification of the glass-resistant erosion resistance of the firebrick refractory sale.
The ladle package verifies the technical feasibility of the new alkaline spray filler (NB-GM) for slag line repair, especially the product. Further research is done to find the most suitable product / equipment. The first industrial test is carried out in the laboratory, the spray of MgO-C slag line, the performance is as follows: 110 ℃ after the weight loss B, product 5.5% bulk density porosity at room temperature compressive strength 2.69 / m319% 3lMPa it confirmed This material with ordinary alkaline spray products compared to excellent performance. RH-OB Ventilators Compared to conventional spray products, new materials can reduce the total amount of aluminum (external) and alkaline (internal) materials used for repair. The ongoing tests are mainly focused on the automatic installation of the spray, especially for practical applications. This has the same effect as the conventional material used previously. The first comprehensive test of these first tests was very useful, and they clearly confirmed the improved performance compared to conventional jetting. Two similar studies confirm the future trends of LC-GM (aluminum) and NB-GM (magnesia) materials. The new optimization equipment has the best masonry operation, that is, no dust and rebound, masonry rate of 5 a 6t / h. New products, especially aluminum spinel amorphous material is more suitable for ladle overall masonry.
2) image processing; 3) three-dimensional calibration, the pixel conversion into a dedicated length unit; 4) by contrast and threshold determination and other image processing on the selected area for surface measurement, and then on the Infiltration depth for statistical description. This can be done by making a series of measurements along the impregnation area. Using the standard deviation, the infiltration uniformity can be reliably evaluated, and the average value of the impregnation can be determined.
PRI products in all samples, the remaining glass spray paint surface area. In addition, the infiltration degree is limited to a small part of the wall thickness of citrus. The refractory material in the interface area in contact with the glass is free of erosion, even at the glass level, and the result may be low against the degree of impregnation. The sample was placed in an electric furnace, heated to 1400 ° C in 14 hours, then warmed at 1400 ° C for 24 hours, and then cooled to room temperature in an electric furnace. Choose to simulate the actual operation of the soaking temperature. When measuring, cut the sample in half so that the glass-Refractory company interface is cross-section tested. The cross-sectional area of ??the remaining glass was measured by a reliable quantification of the glass-resistant erosion resistance of the firebrick refractory sale.
The ladle package verifies the technical feasibility of the new alkaline spray filler (NB-GM) for slag line repair, especially the product. Further research is done to find the most suitable product / equipment. The first industrial test is carried out in the laboratory, the spray of MgO-C slag line, the performance is as follows: 110 ℃ after the weight loss B, product 5.5% bulk density porosity at room temperature compressive strength 2.69 / m319% 3lMPa it confirmed This material with ordinary alkaline spray products compared to excellent performance. RH-OB Ventilators Compared to conventional spray products, new materials can reduce the total amount of aluminum (external) and alkaline (internal) materials used for repair. The ongoing tests are mainly focused on the automatic installation of the spray, especially for practical applications. This has the same effect as the conventional material used previously. The first comprehensive test of these first tests was very useful, and they clearly confirmed the improved performance compared to conventional jetting. Two similar studies confirm the future trends of LC-GM (aluminum) and NB-GM (magnesia) materials. The new optimization equipment has the best masonry operation, that is, no dust and rebound, masonry rate of 5 a 6t / h. New products, especially aluminum spinel amorphous material is more suitable for ladle overall masonry.
2016年11月4日星期五
Development and Prospect of Refractories
refractory material is a refractory degree of not less than 1580 degrees, a better thermal shock and chemical erosion, low thermal conductivity and low expansion coefficient of inorganic non-metallic materials. Its widely used in iron and steel, glass, cement and other industries. Refractories have their own characteristics have been proven advantages, but its shortcomings and deficiencies are also different. The development of refractories on the whole in the new products, new processes, such as the direction of development trends.
Refractory material firebrick refractory is mainly made of raw materials such as bauxite, dolomite, silica, magnesite, steel fiber and so on. The development of refractories in the national industrial production applications have a pivotal position.
Refractory materials basic refractories according to the product shape and compact degree, a casting method, melt blowing method, sintering method. Sintering method is part of the raw material pre-firing clinker, cracking and screening, and then a certain percentage of mixing with the raw materials, through molding, drying and firing. The purpose of raw materials is to burn the moisture, organic debris and gas burned. Reduce the sintering products shrink to ensure the accuracy of finished size. In order to homogenize the ingredients and particles of the various raw materials and clinker, kneading is carried out while the binder is added to enhance the bonding strength.
Casting method is to mix raw materials through the process of mixing and fine grinding, in high temperature baking, direct casting, cooling crystallization, annealing into products.
The melt blow method is a method in which the ingredients are melted and then sprayed with high pressure air or superheated steam to disperse them into steel fibers or hollow spheres.
refractory company Henan Xinmi Changxing Refractory Material Co., Ltd. Located in Henan Province,China.ChangXing's product portfolio covers shaped products such as refractory materials,refractory brick, refractory castable,refractory nozzle, ceramic fiber, slide gate, etc; unshaped products including repair, construction and casting mixes and mortars.exported to more than 20 countries, such as Thailand, Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq and so on.
Refractory material firebrick refractory is mainly made of raw materials such as bauxite, dolomite, silica, magnesite, steel fiber and so on. The development of refractories in the national industrial production applications have a pivotal position.
Refractory materials basic refractories according to the product shape and compact degree, a casting method, melt blowing method, sintering method. Sintering method is part of the raw material pre-firing clinker, cracking and screening, and then a certain percentage of mixing with the raw materials, through molding, drying and firing. The purpose of raw materials is to burn the moisture, organic debris and gas burned. Reduce the sintering products shrink to ensure the accuracy of finished size. In order to homogenize the ingredients and particles of the various raw materials and clinker, kneading is carried out while the binder is added to enhance the bonding strength.
Casting method is to mix raw materials through the process of mixing and fine grinding, in high temperature baking, direct casting, cooling crystallization, annealing into products.
The melt blow method is a method in which the ingredients are melted and then sprayed with high pressure air or superheated steam to disperse them into steel fibers or hollow spheres.
refractory company Henan Xinmi Changxing Refractory Material Co., Ltd. Located in Henan Province,China.ChangXing's product portfolio covers shaped products such as refractory materials,refractory brick, refractory castable,refractory nozzle, ceramic fiber, slide gate, etc; unshaped products including repair, construction and casting mixes and mortars.exported to more than 20 countries, such as Thailand, Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq and so on.
2016年11月2日星期三
Refractory concrete of bauxite cement - Basic information
Refractory alumina bauxite concrete is the use of cement, refractory aggregate, admixture and water by a certain percentage of mixed molding, curing and hardening. Bauxite refractory concrete refractory brick with the same high temperature performance of the highest refractory temperature of 1650 degrees, when there are unparalleled advantages of refractory bricks. The refractory bricks in practical application of the formation of arbitrarily poor, and alumina refractory castable can be based on actual needs, according to design requirements, so that the internal structure of the drying furnace to form the ideal surface structure to form the ideal hot air. Thereby increasing the heat utilization rate. Shaped part of the refractory alumina brick masonry in the high temperature state of the overall strength is poor, resulting in residual shrinkage under high temperature, the roof is easy to collapse. The alumina refractory concrete structure is to make up for this shortcoming, it makes the furnace top as a whole structure, strength is very big, will not appear collapse phenomenon. Thereby prolonging the service life of the drying furnace.
The use of alumina castable materials concrete structure, greatly reducing the manufacturing cost. The use of alumina refractory concrete structure manufacturing and repair work is simple, convenient, easy to operate, repair time is short. In short, bauxite refractory concrete and refractory bricks compared to simplify the production process, reducing production costs and improve the quality of the drying furnace, is a better economic refractories.
The use of alumina castable materials concrete structure, greatly reducing the manufacturing cost. The use of alumina refractory concrete structure manufacturing and repair work is simple, convenient, easy to operate, repair time is short. In short, bauxite refractory concrete and refractory bricks compared to simplify the production process, reducing production costs and improve the quality of the drying furnace, is a better economic refractories.
High strength abrasion - resistant castables for boiler furnaces lining
High-strength refractory castable high strength wear-resistant castable by the high-strength aggregate, powder mineral additive composition, the optimal formulation design, with the smallest wear resistance, high strength, shape can be arbitrarily controlled, the overall strong, simple construction, Due to the addition of polymer, the base layer of concrete bonding firm. High-strength wear-resistant castable cheap, for the requirements of the construction site is the first choice of wear-resistant materials.
High-strength wear-resistant insulating castable refractory is a cement-based composite single-component dry mortar, from the high-strength cement, mineral admixture, high-strength aggregate and anti-cracking agent, the industrial production from the preparation. High-strength wearable castable can be used at the site of mixing with water, good construction workability, by artificial plaster in the silo or high insulating brick mine surface to form a certain thickness of the anti-wear layer, after the normal conservation to achieve technical requirements, with wear resistance High, and the basic concrete (steel silo) bonding strength, impact resistance, high compressive strength, durability, long life and so on. High-strength wear-resistant refractory material castable dedicated to metallurgy, coal, thermal power, chemical, cement and other industries Chong slag ditch, mine trough, unloading trough, the hopper, silo lining material anti-wear layer and water conservancy and hydropower, port and other projects Of the discharge gate, discharge hopper anti-wear layer, play a protective foundation of concrete (or steel silo) role. basic refractories Boiler kiln lining easy to wear parts with high-strength wear-resistant castable HF series castable is widely used throughout the country to build furnace kiln boiler construction and repair works.
High-strength wear-resistant insulating castable refractory is a cement-based composite single-component dry mortar, from the high-strength cement, mineral admixture, high-strength aggregate and anti-cracking agent, the industrial production from the preparation. High-strength wearable castable can be used at the site of mixing with water, good construction workability, by artificial plaster in the silo or high insulating brick mine surface to form a certain thickness of the anti-wear layer, after the normal conservation to achieve technical requirements, with wear resistance High, and the basic concrete (steel silo) bonding strength, impact resistance, high compressive strength, durability, long life and so on. High-strength wear-resistant refractory material castable dedicated to metallurgy, coal, thermal power, chemical, cement and other industries Chong slag ditch, mine trough, unloading trough, the hopper, silo lining material anti-wear layer and water conservancy and hydropower, port and other projects Of the discharge gate, discharge hopper anti-wear layer, play a protective foundation of concrete (or steel silo) role. basic refractories Boiler kiln lining easy to wear parts with high-strength wear-resistant castable HF series castable is widely used throughout the country to build furnace kiln boiler construction and repair works.
2016年10月28日星期五
Slide Gate Plate---refractory material
Slide Gate Plate
Introduction
Changxing Refractory manufacture various types of slide gate plate, such as 1qc slide gate plate, 2qc slide gate plate. Changxing Refractory slide gate plate uses sintered alumina and mullite as raw material, then be added into some of the carbon matrix components and anti-oxidant(such as aluminum, silicon metal, SiC, B4C, Mg-B and so on), adding binder pitch or phenolic resin mixed with coal Nerishige type, fired in a reducing atmosphere to form alumina oxide carbon refractories sliding gate plate. Slide gate plates fired at high temperatures cover Al2O3-C based, Al2O3-ZrO2-C based and MgO-spinel based, Changxing Refractory supports the customer in flow control offering a range of ladle slide gate products. We have a wide range of refractory materials for achieving consistent and reliable high performance in all areas of slide gate applications. Balanced refractory life of plates, ladle nozzles and well blocks enables a cost-effective operation. Slide gate plate can be used for ladle and tundish.
Advantages
1. High strength
2. Good erosion resistance
3. Excellent thermal shock resistance
Application
The slide gate plate is the best choice for large and medium sized ladles and con-casting tundish. It can meet various needs of different steel grades.
Contect source:
http://www.yilongrefractory.com/ProductServletOne?id1=4&id=53
Introduction
Changxing Refractory manufacture various types of slide gate plate, such as 1qc slide gate plate, 2qc slide gate plate. Changxing Refractory slide gate plate uses sintered alumina and mullite as raw material, then be added into some of the carbon matrix components and anti-oxidant(such as aluminum, silicon metal, SiC, B4C, Mg-B and so on), adding binder pitch or phenolic resin mixed with coal Nerishige type, fired in a reducing atmosphere to form alumina oxide carbon refractories sliding gate plate. Slide gate plates fired at high temperatures cover Al2O3-C based, Al2O3-ZrO2-C based and MgO-spinel based, Changxing Refractory supports the customer in flow control offering a range of ladle slide gate products. We have a wide range of refractory materials for achieving consistent and reliable high performance in all areas of slide gate applications. Balanced refractory life of plates, ladle nozzles and well blocks enables a cost-effective operation. Slide gate plate can be used for ladle and tundish.
Advantages
1. High strength
2. Good erosion resistance
3. Excellent thermal shock resistance
Application
The slide gate plate is the best choice for large and medium sized ladles and con-casting tundish. It can meet various needs of different steel grades.
Contect source:
http://www.yilongrefractory.com/ProductServletOne?id1=4&id=53
2016年10月25日星期二
Aluminum Carbon Long Nozzle (Ladle Shroud)
![]() |
Aluminum Carbon Long Nozzle (Ladle Shroud) |
Introduction
Based on function categories, Changxing Refractory aluminium carbon long nozzles(also called Ladle Shroud, Long Nozzle) can be classified into preheating refractory nozzle, non-preheating refractory nozzle, argon blowing nozzle and not argon blowing nozzle; and according to material quality, ladle shroud are mainly classified into aluminum carbon, aluminum-zirconia carbon and alumina-magnesia carbon. This kind of refractory nozzle is provided with good liquid steel washing resistance performance and liquid steel erosion performance in the course of use, which can effectively prevent oxidation of air to liquid steel and its spatter.
Advantages and Application
Changxing Refractory ladle shroud enjoys performances of purifying liquid steel, prevent liquid steel oxidation, with good liquid steel washing resistance and erosion resistance.
Content source:
http://www.yilongrefractory.com/ProductServletOne?id1=3&id=50
2016年10月19日星期三
Development Prospect of Refractories in China
In recent years, the level of China's refractory material industry has also been increasing, but the general demand for refractories will be substantially reduced, and high-quality, long life, high efficiency, functional refractories and the corresponding increase in demand, refractory dry vibration mix enterprises need to continuously improve the comprehensive Strength, in particular, to improve research and innovation capacity, and constantly develop high-life refractory products to meet the needs of users. In order to achieve the high life of refractories, in addition to improving the performance of refractory itself, the application of refractory technology is also very important to increase the comprehensive application of refractory technology research and development of refractory high life to meet the high-temperature steel and other industries to reduce fire Material consumption needs.
The future of refractory tundish castable technology will be longevity, low consumption, energy saving, environmental protection, low carbon, recycling and functional integration of the direction of research and innovation, thereby enhancing the comprehensive service capabilities, from the overall upgrading of China's international competitiveness of refractory industry , Refractory industry will also lead the development of China's special materials industry, technological revolution and rapid development.
(A) the development of energy-saving environment-friendly refractory industry
Refractory material is an important auxiliary material in the steel industry, and has wide application in the national steel industry. At present, China's annual consumption of refractories is about 10 million t, with the use of waste refractories to 400 million t, the proportion of refractory refractory refractory consumption of 45% of the total. If the recycling of refractory materials can be recycled high-grade raw materials, the use of renewable raw materials and optimize their bonding agent and additives, not only can produce high-quality unshaped refractories, but also produce high-quality shaped refractory, but also large Reducing the cost of preparation of refractories; not only saves the country's mineral resources and energy, but also reduces environmental pollution, can effectively reduce product costs and promote the overall development of the steel industry, economic and social benefits significantly.
Therefore, the refractory enterprises need to further improve the production level of all-round, and gradually the full use of clean, low-carbon environment-friendly energy, increase efforts to improve the recycling of waste refractory, waste refractory comprehensive utilization technology, Waste heat utilization technology, vigorously develop the circular economy, as far as possible to reduce the production process of waste emissions, to avoid the production of waste on the environment pollution. In addition, enterprises should speed up the elimination of production capacity inefficient production equipment, increasing the share of unshaped refractories, vigorously develop low-temperature sintering or burning and other new technologies, fundamentally improve the ability of sustainable development of refractories.
(B) the development of internationally competitive refractory industry
Competitiveness has always been the problem of all walks of life has always attached importance to, but also the fundamental survival of enterprises. The future development of China's refractory industry, will focus on the international, seeking to achieve greater development in the world and profitability. In recent years, with the continuous development of refractory industry, China's refractory production level is close to or reached the international advanced level, product cost, quality are strong international market competitiveness. Products not only by Southeast Asia, the Middle East and other developing countries of all ages, but also a large number of exports to Europe and the United States and other developed countries, and achieved good results, which also shows that China's refractories enterprises are not satisfied with the domestic marketing, Has been very far-sighted in this larger stage in the world to obtain greater profits, and also proved that China's refractory products have the strength and ability to achieve significant international development.
(C) the development of comprehensive technical level of refractory industry
Refractory material industry with comprehensive technical level not only refers to producing refractory products with good quality, environmental protection, light quality and other high-quality features, but also refers to the production of refractory matching equipment with long life, good performance, high yield and other high-quality features. Comprehensive technical level of assessment factors, involving refractory products and production equipment, such as a set of process, as well as a high level of product development, supervision and management personnel and other factors, the comprehensive evaluation of these factors determine the refractory industry comprehensive technical level.
In addition, the overall contracting refractory enterprises must also have a certain iron and steel enterprises to have a certain refractory product development and quality improvement of the autonomy, according to the steel enterprises in different parts of high temperature equipment, the erosion of refractory differences, relying on enterprise technology Different parts of the refractory materials used to optimize the configuration, give full play to the potential use of refractories, refractories to improve service life and reduce steel consumption of refractories. Because of its unique advantages and strong adaptability, the refractory material whole contracting mode will become an advanced mainstream business model which is unanimously recognized and widely applied by the steel industry and all high temperature industries.
Therefore, enterprises engaged in the overall contracting of refractories must change from the original manufacturer to the comprehensive service provider, and promote enterprises to pay more attention to science and technology investment, enhance innovation ability, strengthen production equipment, strict production, masonry construction and other links Quality, so that the comprehensive technical ability of enterprises to continuously upgrade and further enhance the competitiveness.
Refractory company Henan Xinmi Changxing Refractory Material Co., Ltd. Located in Henan Province,China.ChangXing's product portfolio covers shaped products such as refractory materials,refractory brick for sale, refractory castable,refractory nozzle, ceramic fiber, slide gate, etc; unshaped products including repair, construction and casting mixes and mortars.exported to more than 20 countries, such as Thailand, Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq and so on.
The future of refractory tundish castable technology will be longevity, low consumption, energy saving, environmental protection, low carbon, recycling and functional integration of the direction of research and innovation, thereby enhancing the comprehensive service capabilities, from the overall upgrading of China's international competitiveness of refractory industry , Refractory industry will also lead the development of China's special materials industry, technological revolution and rapid development.
(A) the development of energy-saving environment-friendly refractory industry
Refractory material is an important auxiliary material in the steel industry, and has wide application in the national steel industry. At present, China's annual consumption of refractories is about 10 million t, with the use of waste refractories to 400 million t, the proportion of refractory refractory refractory consumption of 45% of the total. If the recycling of refractory materials can be recycled high-grade raw materials, the use of renewable raw materials and optimize their bonding agent and additives, not only can produce high-quality unshaped refractories, but also produce high-quality shaped refractory, but also large Reducing the cost of preparation of refractories; not only saves the country's mineral resources and energy, but also reduces environmental pollution, can effectively reduce product costs and promote the overall development of the steel industry, economic and social benefits significantly.
Therefore, the refractory enterprises need to further improve the production level of all-round, and gradually the full use of clean, low-carbon environment-friendly energy, increase efforts to improve the recycling of waste refractory, waste refractory comprehensive utilization technology, Waste heat utilization technology, vigorously develop the circular economy, as far as possible to reduce the production process of waste emissions, to avoid the production of waste on the environment pollution. In addition, enterprises should speed up the elimination of production capacity inefficient production equipment, increasing the share of unshaped refractories, vigorously develop low-temperature sintering or burning and other new technologies, fundamentally improve the ability of sustainable development of refractories.
(B) the development of internationally competitive refractory industry
Competitiveness has always been the problem of all walks of life has always attached importance to, but also the fundamental survival of enterprises. The future development of China's refractory industry, will focus on the international, seeking to achieve greater development in the world and profitability. In recent years, with the continuous development of refractory industry, China's refractory production level is close to or reached the international advanced level, product cost, quality are strong international market competitiveness. Products not only by Southeast Asia, the Middle East and other developing countries of all ages, but also a large number of exports to Europe and the United States and other developed countries, and achieved good results, which also shows that China's refractories enterprises are not satisfied with the domestic marketing, Has been very far-sighted in this larger stage in the world to obtain greater profits, and also proved that China's refractory products have the strength and ability to achieve significant international development.
(C) the development of comprehensive technical level of refractory industry
Refractory material industry with comprehensive technical level not only refers to producing refractory products with good quality, environmental protection, light quality and other high-quality features, but also refers to the production of refractory matching equipment with long life, good performance, high yield and other high-quality features. Comprehensive technical level of assessment factors, involving refractory products and production equipment, such as a set of process, as well as a high level of product development, supervision and management personnel and other factors, the comprehensive evaluation of these factors determine the refractory industry comprehensive technical level.
In addition, the overall contracting refractory enterprises must also have a certain iron and steel enterprises to have a certain refractory product development and quality improvement of the autonomy, according to the steel enterprises in different parts of high temperature equipment, the erosion of refractory differences, relying on enterprise technology Different parts of the refractory materials used to optimize the configuration, give full play to the potential use of refractories, refractories to improve service life and reduce steel consumption of refractories. Because of its unique advantages and strong adaptability, the refractory material whole contracting mode will become an advanced mainstream business model which is unanimously recognized and widely applied by the steel industry and all high temperature industries.
Therefore, enterprises engaged in the overall contracting of refractories must change from the original manufacturer to the comprehensive service provider, and promote enterprises to pay more attention to science and technology investment, enhance innovation ability, strengthen production equipment, strict production, masonry construction and other links Quality, so that the comprehensive technical ability of enterprises to continuously upgrade and further enhance the competitiveness.
Refractory company Henan Xinmi Changxing Refractory Material Co., Ltd. Located in Henan Province,China.ChangXing's product portfolio covers shaped products such as refractory materials,refractory brick for sale, refractory castable,refractory nozzle, ceramic fiber, slide gate, etc; unshaped products including repair, construction and casting mixes and mortars.exported to more than 20 countries, such as Thailand, Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq and so on.
订阅:
博文 (Atom)
